木板絲印油墨木板表面絲印油墨 

品牌：歐萊斯
一.  產品名稱: PU自干漆  雙組份自干油漆  聚氨酯亮光油墨 平光油墨 啞光油墨 
二．主要特性：
高級自干油墨，漆膜堅硬、柔韌光亮豐滿，保護性及遮蓋力特佳，機械性強，顏色鮮艷持久 由多種改良耐候樹脂組成，高品質，遮蓋力強。優良的附著力及層間密著性，為涂裝作了物理性能的良好基礎。
三．產品特征:
1.飽滿度光亮度優異;
2.顏色鮮艷、遮蓋力特佳;
3.耐候性、耐黃變性好、耐酸堿性優異;
4.干燥速度快,流平性佳;
5.施工性能好,不易受高溫潮溫天氣影響.
四．施工參數：
1.預涂底材必須除去塵土、油污、銹蝕。
2.調配噴涂前應嚴格按照標簽標示的比例調配。用多少配多少，以免成浪費。
施工比例：油漆：固化劑：稀釋劑=2：1：2
3.地心力噴槍（上壺）直徑1.5-1.7mm,壓力0.4-0.6Mpa，建議涂裝2道。  
4.本產品噴涂后常溫2-4小時可干燥，實干12-24小時。
五．貯存于運輸：
產品在運輸中應防止雨淋、日光曝曬，應存放在陰涼、干燥、通風的庫內，并防止日光直接照射，隔絕火源，遠離熱源。
六．規格及保質期：
產品在封閉原包裝的條件下，貯存期自生產完成并檢驗合格之日起為一年。
Brand: oleser
Product Name: PU. A self dry paint two-component polyurethane paint dry matte ink ink light ink light
Two. Main characteristics:
The advanced self drying ink is hard, flexible, bright, plump, protective and covering. It is strong in mechanical and colorful. It is made of many improved weather resistant resins, and has high quality and strong covering power. The good adhesion and interlayer density are the good basis for the physical properties of the coating.
Three. Product characteristics:
1. full degree of light is excellent;
2. bright color and excellent cover force.
3. weathering resistance, yellow denaturation and excellent acid and alkaline resistance.
4. the drying speed is fast and the flow leveling is good.
5. good construction performance, not easy to be affected by high temperature and temperature weather.
Four. Construction parameters:
1. pre coating material must remove dust, oil and rust.
2. before spraying, the spraying should be made in strict proportion to the proportion indicated by the label. How much to use, so as not to be a waste.
Construction ratio: Paint: curing agent: diluent =2:1:2
3. geocentric gun (upper pot) diameter 1.5-1.7mm, pressure 0.4-0.6Mpa, it is recommended to paint 2.
4. this product can be dried at normal temperature for 2-4 hours after spraying, and dry for 12-24 hours.
Five. Stored in transport:
Products should be prevented from rain and sun exposure during transportation. They should be stored in a cool, dry and ventilated storehouse, and prevent direct sunlight exposure, so as to keep away from fire sources and away from heat sources.
Six. Specifications and warranty period:
Under the condition of closed original packing, the storage period is one year from the date of completion of production and the date of inspection.[本信息來自于今日推薦網]