環保型 氟蛋白泡沫滅火劑 3%（FP、-16℃）--耐海水 6%（FP、 

該滅火劑為低倍數泡沫滅火劑，適用于各種低倍數泡沫產生器。可在醇類等水溶性物質表面形成一層聚合物膠膜，靠泡沬和膠膜的雙重作用，迅速而有效地隔絕空氣，將火盤息。 主要用于撲救醇、酯、醚、酮、有機酸等水溶性物質的火災； 也可撲救石油及石油產品等非水溶性物質的火災。廣泛用于大 型化工企業、油田、油庫、船舶、機庫等固定滅火裝置，也可用于消防車等移動滅火設備，對大面積油類火災和固體火災撲救。

混合比：

FP3%型與水的混合比為3:97

FP6%型與水的混合比為6:94

包裝、運輸及貯存要求：

8、產品包裝為25Kg、50Kg、200Kg塑料桶，1000Kg噸桶。

b、 產品在運輸、貯存期間不得混入其它化學品及其它類型的泡沫滅火劑。

c、 產品應存放在陰涼、干燥的庫房內，防止曝曬，貯存的環境溫度低于45℃,高于其最低使用溫度。

d、 公司可為您配置耐寒型、耐海水型產品。

Overview:

The fire extinguishing agent is a low-fold foam fire extinguishing agent suitable for various low-fold foam generators. A layer of polymer film can be formed on the surface of water-soluble substances such as alcohols, and the double action of foam and film can quickly and effectively isolate the air and suffocate the fire.

It is mainly used to save fires from water-soluble substances such as alcohols, esters, ethers, ketones and organic acids. It can also save fires from water-insoluble substances such as petroleum and petroleum products. Widely used in large chemical enterprises, oil fields, dl depots, ships, hangars and other fixed fire-fighting devices, can also be used for fire-fighting vehicles and other mobile fire-fighting equipment, for large-area oil fires and sold fires.

mixing ratio:

The mixing ratio of FP3% to water is 3:97.

The mixing ratio of FP6% to water is 6:94

Packaging, transportation and storage requirements:

The product packaging is 25Kg, 50Kg, 200Kg plastic drum, 1000Kg ton barrel.

Products must not be mixed with other chemicate and other types of foam fire extinguishing agents during transportation and storage.

The product should be stored in a cool, dry warehouse to prevent exposure. The ambient temperature of storage is lower than 45*C. which Is higher than its minimum use temperature.

the company can prepare cokl-resistant and seawater-resistant products for you.